- Insulation: HD-PE
- Outer sheath diameter: 0.55 mm nominal
- Overall diameter: 4.6 mm nominal
Expected to ship within 7 days of order
- 100% HPE J9285B COMPATIBLE: Works with HPE switches like 5400zl, 1040, 2930F, 5406, and others
- TECHNICAL SPECS: 7m (23ft) / 10 Gbps / Passive Twinax (Copper) / 2x SFP+ Pluggable Connector / 100 Ohm Impedance / 30 AWG Wire Gauge / PVC Cable Jacket / Hot swappable / MSA Compliant
- TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Cisco routers and switches
Expected to ship within 13 days of order
- 2 x LC Male to 2 x LC Maleandnbsp;
- Twin Zip, Multimode 50/125µm fibre
- Total immunity to electrical and electromagnetic interference (EMI)
Expected to ship within 13 days of order
- OM5 FIBER CABLE: OM5 LOMMF Cable is optimized for advanced 40/100Gbps fiber networks; Extended 850-953nm wavelength support enables SWDM (short wavelength division multiplexing) for greater channel isolation, enhancing performance capacity beyond OM4 cables
- QUALITY CONSTRUCTION: LC/LC-UPC ends for improved return loss over PC polish; Zipcord design, color-coded connectors for polarity; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 6cm and 3cm when unloaded
- SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 2.4dB/km meets or exceeds industry standards
Expected to ship within 13 days of order
- 1.5 m
- QSFP28 Male
- QSFP28 Male
Expected to ship within 8 days of order
- Cat.7 Solid network cable for outdoor use
- Weather resistant, suitable for direct burial
- 4P 23/1 AWG, S/FTP, LSZH, OFC
Expected to ship within 7 days of order
-or spend €100.00 to get free shipping
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)
- Integrated snagless connector for latch protection
Expected to ship within 13 days of order
-or spend €100.00 to get free shipping
- PUSH-PULL OM4 CABLE: OM4 LOMMF Cable is immune to EMI and supports up to 100Gbps networks; Push-pull tab design provides quick access for precise insertion/removal in high-density installations; Retractable connector housings for toolless polarity swapping
- QUALITY CONSTRUCTION: LC/LC-UPC ends for improved return loss over PC polish; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 6cm and 3cm when unloaded
- SAFETY AND RELIABILITY: Individually tested for signal integrity; LSZH (Low-Smoke Zero-Halogen) jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation below 2.4dB/km at 850nm meets or exceeds industry standards
Expected to ship within 13 days of order
-or spend €100.00 to get free shipping
- 20 m
- SFP28 Male
- SFP28 Male
Expected to ship within 7 days of order
-or spend €100.00 to get free shipping
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)
- Integrated snagless connector for latch protection
Expected to ship within 13 days of order
-or spend €100.00 to get free shipping
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
Expected to ship within 13 days of order
-or spend €100.00 to get free shipping
- 100% Guaranteed Compatibility in all OEM applications
- Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification
- Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms
Expected to ship within 13 days of order
-or spend €100.00 to get free shipping
- DAC
- 1.5 m
- SFP+ Male
Expected to ship within 8 days of order
-or spend €100.00 to get free shipping
- 5 m
- SFP28 Male
- SFP28 Male
Expected to ship within 7 days of order
-or spend €100.00 to get free shipping
- OM4 FIBER CABLE: OM4 Laser-Optimized Multimode Fiber Cable delivers up to 100 Gbps Ethernet; Full-duplex zip-cord with color-coded TX/RX connectors for cabling servers and Storage Area Networks (SANs)
- QUALITY CONSTRUCTION: 50/125µm fiber core/cladding is immune to EMI; Protective Aramid fiber sheath for improved tensile strength and crush resistance; LC/LC connectors with UPC polished ceramic ferrules for insertion loss below 0.3dB
- RATINGS AND RELIABILITY: Individually tested for signal integrity; LSZH jacket emits low-smoke and fumes if combusted; Attenuation value under 2.3dB/km meets or exceeds industry standards
Expected to ship within 13 days of order
-or spend €100.00 to get free shipping
Network cables are an essential part of any office setup, regardless of the office size - anything from a home office setup, to large corporate offices will require a range of network cables. We carry network cables in stock for every purpose, be it short patch cables for use in a server cabinet, or much longer cables for running above ceilings or behind walls, or anything in between - we have it all. The main connection type used for network cables is the RJ45 connector type. This is the generic standard for connection to switches, patch panels, network cards etc. When picking the cable that is right for you, you should also look out for which color may work best in your setting, and you might want to consider a snagless cable, especially if you run multiple cables across your network setup.
