| OUT OF STOCK (0 local - 0 remote) |
Thermal Grizzly Minus Pad 8 (Thermal Pad) 120x20x3.0mm
| IN STOCK |
Thermal Grizzly Minus Pad 8 (Thermal Pad) 100x100x2.0mm
| IN STOCK |
Thermal Grizzly KryoSheet Graphene Thermal Pad - 29 x 25 mm
| IN STOCK |
Arctic MX-4 Thermal Paste Compound - 8g
| IN STOCK |
Thermal Grizzly Conductonaut EXTREME Liquid Metal Thermal Paste - 1.0 Gram
| IN STOCK |
Noctua NT-H1 1.4ml (3.5g) Thermal Paste
| IN STOCK |
Thermal Grizzly Minus Pad 8 (Thermal Pad) 30x30x1.5mm
| IN STOCK |
StarTech 20G CPU Thermal Paste Compound
| IN STOCK |
Startech Metal Oxide Thermal Compound - 1.5 Grams
| IN STOCK |
Arctic MX-4 Thermal Paste Compound - 4g
| IN STOCK |
Arctic Cooling MX-6 Ultimate Performance Thermal Paste 8g
| IN STOCK |
EVGA FROSTBITE 2 Thermal Grease Compound 2.5g
| IN STOCK |
Arctic Cooling MX-6 Ultimate Performance Thermal Paste 4g
| IN STOCK |
Thermal Grizzly Kryonaut Thermal Grease Paste - 37 Grams
| IN STOCK |
Thermal Grizzly Minus Pad 8 (Thermal Pad) 30x30x1.0mm
| IN STOCK |
The Thermal Grizzly Minus Pad Extreme thermal pad is silicone based with modelling clay like consistency. This allows a perfect surface shaping with maximum possible compression. The minus pad extreme is electrically insulating.
Due to the consistency only one-time use is recommended. The thermal conductivity was improved by about 260 % over the minus pad 8 which allows best cooling for tough cooling operations such as voltage regulators and memory ICs.
This pad is 120 x 20 x 1mm in size, and it is ideal for overclocked, water cooled or air cooled systems.
Engineered in Germany by Thermal Grizzly.
| DENSITY | 3.38 g/cm³ |