StarTech.com 3m (9.8ft) SC to SC (UPC) OS2 Single Mode Duplex Fiber Optic Cable, 9/125µm, 40G/100G Zipcord, Bend Insensitive, Low Insertion Loss - LSZH Fiber Jumper Cord by StarTech
- Be the first to review
- Item Number: FD3365967
- Part Number: SMDOS2SCSC3M
|
Expected to ship within 11 days of order Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Key Features
- OS2 FIBER CABLE: Single Mode OS2 Fiber Cable is immune to EMI and optimized for 10/40/100G networks; Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances
- QUALITY CONSTRUCTION: SC/SC-UPC ends for improved return loss over PC polish; Number-labeled connectors to indicate polarity; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm
- SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 0.35dB/km outperforms industry standards
- COMPATIBILITY: Single Mode Fiber Patch Cord supports 40G/100G networks; Backward compatible with OS1; High micro-bend resistance facilitates tight bends in complex installations; Ideal for connecting between servers/switches and data center equipment
- SPECS: 3m (9.8 foot); OS2 Single Mode; SC/SC (UPC) Duplex; 100Gbps; 9/125µm; 1260-1625nm Laser Optimized; Insertion Loss: ≤0.3dB; Return Loss: ≥55dB; Cable OD: 2mm; Bend Radius: 10mm (0.39in) loaded/unloaded
See product description
Similar Products
-
Lindy U/UTP Cat5e RJ45 Patch Cable 0.3m – Grey
IN STOCK
€ 1.39 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Patch Cable - Yellow - 1ft
IN STOCK
€ 6.61 (incl. VAT) -
C2G Unshielded Non-Booted Cat6 Ethernet Network Cable - Purple - 7ft
IN STOCK
€ 11.29 (incl. VAT) -
C2G Unshielded Snagless Cat5e Ethernet Network Patch Cable - Blue - 200ft
IN STOCK
€ 98.81 (incl. VAT) -
C2G Cat6 550MHz Snagless 5ft Patch Cable - Yellow
IN STOCK
€ 4.23 (incl. VAT) -
C2G Cat6 Unshielded (UTP) 6ft Network Patch Cable - Blue
IN STOCK
€ 5.04 (incl. VAT) -
C2G Cat6 10 ft Snagless Network Patch Ethernet Cable - Blue
IN STOCK
€ 7.80 (incl. VAT) -
Tripp Lite 100FT LC to LC Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
€ 53.07 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 0.3m – Red
IN STOCK
€ 1.71 (incl. VAT) -
3FT Belkin RJ-45 Male To RJ-45 Male Cat 6 Networking Cable - Blue
IN STOCK
€ 7.99 (incl. VAT) -
Tripp Lite 3FT RJ45 Right Angle Up Male to RJ45 Male Cat6 Gigabit Molded Patch Cable - Blue
IN STOCK
€ 7.93 (incl. VAT) -
C2G Cat6 550MHz Snagless Unshielded Network Patch Cable, 2.14 Meter (7 FT) Networking Cable
IN STOCK
€ 6.28 (incl. VAT) -
Startech 10ft DB9 Female to DB9 Male Network Cable
IN STOCK
€ 7.19 (incl. VAT) -
250FT C2G RJ-45 Male To RJ-45 Male Cat6 Ethernet Patch Cable - Blue
IN STOCK
€ 224.22 (incl. VAT) -
Tripp Lite 10FT ST to ST Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
€ 17.27 (incl. VAT)
Details
Enhance the performance capabilities of CWDM applications over an OS2 fiber network
OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.
Compatibility
This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.
Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished SC to SC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive Fiber Core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.
LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.
Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
The StarTech.com Advantage
OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.
Compatibility
This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.
Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished SC to SC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive Fiber Core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.
LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.
Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
The StarTech.com Advantage
Specifications
| LENGTH | 3 m |
| LEFT CONNECTOR | SC |
| RIGHT CONNECTOR | SC |
| MATERIAL | Low smoke zero halogen (LSZH), Polypropylene |