Lindy 3m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3457442
- Part Number: 47265
|
Expected to ship within 13 days of order Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
C2G Cat5E 350MHz Snagless Patch Cable Black 2.1 Meter (7 FT) Networking Cable Black
IN STOCK
€ 4.88 (incl. VAT) -
6IN C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Unshielded Network Patch Cable - Green
IN STOCK
€ 1.52 (incl. VAT) -
C2G Unshielded Snagless Cat5e Ethernet Network Cable - Yellow - 3ft
IN STOCK
€ 3.77 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Orange - 15ft
IN STOCK
€ 18.80 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 5m – Black
IN STOCK
€ 6.65 (incl. VAT) -
StarTech Cat 6 Black Molded RJ45 UTP Patch Cable Cord 2.13 Meter (7 FT)
IN STOCK
€ 6.82 (incl. VAT) -
10FT C2G RJ-45 Male To RJ-45 Male Cat6a Snagless Unshielded Network Patch Ethernet Cable - Yellow
IN STOCK
€ 17.93 (incl. VAT) -
33FT Tripp Lite LC to LC Multimode Duplex Fiber Optics Patch Cable - Lime Green
IN STOCK
€ 71.97 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 2m – Red
IN STOCK
€ 3.95 (incl. VAT) -
Tripp Lite 7FT RJ45 Male Cat6 Gigabit Snagless Molded UTP Patch Cable - Grey
IN STOCK
€ 5.52 (incl. VAT) -
C2G Snagless Unshielded Cat5e Ethernet Network Cable - Blue - 15ft
IN STOCK
€ 7.65 (incl. VAT) -
C2G 300ft Cat6 Snagless Solid Shielded Network Cable - Blue
IN STOCK
€ 323.23 (incl. VAT) -
C2G Unshielded Non-Booted Cat6 Ethernet Network Cable - Yellow - 5ft
IN STOCK
€ 5.38 (incl. VAT) -
C2G Unshielded Snagless Cat5e Ethernet Network Patch Cable - White - 14ft
IN STOCK
€ 7.47 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Black - 35ft
IN STOCK
€ 36.02 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 3 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |