Lindy 1.5m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3470724
- Part Number: 47263
|
Expected to ship within 7 days of order Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
StarTech 7FT RJ45 Male to RJ45 Male Cat5e Snagless Patch Cable - Gray
IN STOCK
€ 7.10 (incl. VAT) -
Tripp Lite 6FT RJ45 Male RJ45 Male Snagless Cat6 UTP Patch Cable - Blue
IN STOCK
€ 9.81 (incl. VAT) -
C2G 04087 Cat6 Unshielded (UTP) 3ft Network Patch Cable - Blue
IN STOCK
€ 4.70 (incl. VAT) -
Tripp Lite 5FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Red
IN STOCK
€ 2.21 (incl. VAT) -
6FT C2G RJ-45 Male To RJ-45 Male Cat6 Slim Snagless Unshielded Ethernet Patch Cable- Blue
IN STOCK
€ 19.33 (incl. VAT) -
C2G Snagless Unshielded Cat6 Ethernet Network Cable - Gray - 0.5ft
IN STOCK
€ 4.12 (incl. VAT) -
Tripp Lite 10FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Green
IN STOCK
€ 6.89 (incl. VAT) -
Tripp Lite 5FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Yellow
IN STOCK
€ 4.81 (incl. VAT) -
StarTech Cat6 10ft Molded Patch Cable Cord - Green
IN STOCK
€ 8.36 (incl. VAT) -
4FT C2G Cat6 Non-Booted RJ-45 Male to RJ-45 Male Unshielded Ethernet Network Patch Cable - Green
IN STOCK
€ 4.84 (incl. VAT) -
1FT Belkin Slim RJ45 Male to RJ45 Male Molded Snagless Patch Cable - White
IN STOCK
€ 5.76 (incl. VAT) -
Tripp Lite 0.15M RJ45 Male to RJ45 Male Premium Cat6 Gigabit Snagless Molded UTP Patch Cable - Red
IN STOCK
€ 2.69 (incl. VAT) -
StarTech.com Shielded (SFTP) Cat6 RJ45 Patch Cable 2m – Gray
IN STOCK
€ 10.32 (incl. VAT) -
13FT Tripp Lite LC Multimode To LC Multimode Duplex Fiber Patch Cable - Aqua
IN STOCK
€ 23.64 (incl. VAT) -
C2G Cat6 Snagless Unshielded 150ft Networking Patch Cable - Blue
IN STOCK
€ 82.35 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 1.5 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |