Lindy 0.5m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3470755
- Part Number: 47261
|
Expected to ship within 12 days of order Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
6IN C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Unshielded Network Patch Cable - Green
IN STOCK
€ 1.93 (incl. VAT) -
Tripp Lite 5FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Yellow
IN STOCK
€ 4.65 (incl. VAT) -
16FT Tripp Lite Duplex LC Singlemode To SC Singlemode 8.3/125 Fiber Optic Patch Cable - Yellow
IN STOCK
€ 18.72 (incl. VAT) -
C2G 20ft Cat6a Snagless Shielded (STP) Network Patch Cable Aqua
IN STOCK
€ 29.79 (incl. VAT) -
Tripp Lite 4FT RJ45 Male to RJ45 Male Cat5e 350MHz Molded Patch Cable - Blue
IN STOCK
€ 2.48 (incl. VAT) -
6FT Belkin RJ-45 Male To RJ-45 Male Cat5e Networking Patch Cable - Yellow
IN STOCK
€ 9.32 (incl. VAT) -
33FT Tripp Lite Duplex Multimode 50/125 LC Male To LC Male Fiber Patch Cable - Orange
IN STOCK
€ 22.47 (incl. VAT) -
StarTech.com Shielded (SFTP) Cat6 RJ45 Patch Cable 5m – Black
IN STOCK
€ 14.07 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Black - 35ft
IN STOCK
€ 33.69 (incl. VAT) -
StarTech Cat6 1ft Snagless UTP Patch Cable Blue
IN STOCK
€ 3.62 (incl. VAT) -
Tripp Lite 3FT Cat6 Gigabit RJ45 Male Snagless Molded Patch Cable - Red
IN STOCK
€ 3.86 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - White - 15ft
IN STOCK
€ 17.37 (incl. VAT) -
10FT C2G RJ-45 Male to RJ-45 Male Cat6a Unshielded Snagless Unshielded Network Patch Ethernet Cable - Green
IN STOCK
€ 14.27 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 3m - Black
IN STOCK
€ 4.08 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 0.3m – Grey
IN STOCK
€ 1.27 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 0.5 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |