Lindy 47662 networking cable Yellow 1 m Cat6a S/FTP (S-STP) by Lindy
- Be the first to review
- Item Number: FD3543757
- Part Number: 47662
|
Expected to ship within 13 days of order Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
See product description
Similar Products
-
C2G 27151 Cat6 550MHz Snagless 3ft Patch Cable - Black
IN STOCK
€ 5.07 (incl. VAT) -
1FT Tripp Lite RJ45 Male To RJ45 Male Cat6 Ethernet Cable - Gray
IN STOCK
€ 3.09 (incl. VAT) -
1000FT C2G Cat5e Bulk Unshielded Network Cable with Stranded Conductors - Blue
IN STOCK
€ 289.61 (incl. VAT) -
StarTech.com 10 Gigabit Shielded (SFTP) Cat6a RJ45 Patch Cable 3m – Gray
IN STOCK
€ 15.61 (incl. VAT) -
7FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Shielded Ethernet Patch Cable - Black
IN STOCK
€ 16.07 (incl. VAT) -
C2G Cat6 Snagless Shielded 25ft Network Cable - Orange
IN STOCK
€ 24.90 (incl. VAT) -
5FT C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Unshielded Network Patch Cable - Green
IN STOCK
€ 4.64 (incl. VAT) -
Tripp Lite 10FT MTP/MPO Multi Mode Female to MTP/MPO Multi Mode Female 12 Fiber Patch Cable - Magenta
IN STOCK
€ 249.96 (incl. VAT) -
Tripp Lite 2FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Blue
IN STOCK
€ 2.51 (incl. VAT) -
Tripp Lite 8FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Blue
IN STOCK
€ 3.69 (incl. VAT) -
10FT Belkin RJ45 Male To RJ45 Male CAT6 Molded Snagless Ethernet Patch Cable - Black
IN STOCK
€ 7.09 (incl. VAT) -
20FT Belkin RJ45 Male To RJ45 Male CAT 6 Molded Snagless Patch Cable - Green
IN STOCK
€ 17.07 (incl. VAT) -
StarTech.com Shielded (SFTP) Cat6 RJ45 Patch Cable 2m – Blue
IN STOCK
€ 10.66 (incl. VAT) -
16FT Tripp Lite SC Multimode To SC Multimode Duplex 50/125 OM3 LSZH Fiber Optic Patch Cable - Aqua Blue
IN STOCK
€ 21.34 (incl. VAT) -
25FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Shielded Ethernet Patch Cable - Black
IN STOCK
€ 24.92 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".
Specifications
| TYPE | Cat6a |
| LENGTH | 1 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | S/FTP (S-STP) |
| MATERIAL | Low smoke zero halogen (LSZH) |
| SNAGLESS | Yes |