Lindy 1m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3543537
- Part Number: 47262
|
Expected to ship within 12 days of order Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
C2G Unshielded Snagless Cat5e Ethernet Network Cable - Yellow - 3ft
IN STOCK
€ 3.74 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 0.3m – Blue
IN STOCK
€ 1.79 (incl. VAT) -
Tripp Lite 5FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Green
IN STOCK
€ 4.80 (incl. VAT) -
Lindy S/FTP LSZH Cat6A RJ45 Patch Cable 3m – Grey
IN STOCK
€ 5.32 (incl. VAT) -
Tripp Lite 10FT RJ45 Male to RJ45 Male Cat5e 350MHz Molded UTP Patch Cable - White
IN STOCK
€ 3.07 (incl. VAT) -
C2G 27162 Cat6 550MHz Snagless 7-ft Patch Networking Cable - White
IN STOCK
€ 6.60 (incl. VAT) -
Tripp Lite 25FT RJ45 Male Cat6 Gigabit Snagless Molded UTP Patch Cable - White
IN STOCK
€ 12.56 (incl. VAT) -
Tripp Lite Cat5e 3FT RJ45 Male 350MHz Snagless Molded UTP Patch Cable - Blue
IN STOCK
€ 2.55 (incl. VAT) -
C2G 20ft Cat6a Snagless Shielded (STP) Network Patch Cable Aqua
IN STOCK
€ 24.60 (incl. VAT) -
C2G 27190 Cat6 Snagless Unshielded (UTP) 1ft Patch Cable - Yellow
IN STOCK
€ 4.22 (incl. VAT) -
Tripp Lite 25FT RJ45 Male Cat6 Gigabit Snagless Molded UTP Patch Cable - Green
IN STOCK
€ 12.56 (incl. VAT) -
20FT C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Unshielded Network Patch Ethernet Cable - Gray
IN STOCK
€ 16.46 (incl. VAT) -
5FT C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Ethernet Patch Cable - Red
IN STOCK
€ 4.59 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 2m – Red
IN STOCK
€ 4.07 (incl. VAT) -
25FT C2G Cat5e RJ-45 Male To RJ-45 Male Snagless Shielded Ethernet Network Patch Cable - Gray
IN STOCK
€ 25.00 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 1 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |