Digitus CAT 5e SF/UTP twisted pair patch cord, raw by Digitus
- Be the first to review
- Item Number: FD2841400
- Part Number: DK-1531-P-305-1
|
Expected to ship within 7 days of order Free shipping within Ireland! |
Key Features
- Insulation: HD-PE
- Outer sheath diameter: 0.55 mm nominal
- Overall diameter: 5.6 mm nominal
- Tensile loading: 150 N max.
- Dynamic bending radius: 8x AD mm min.
- Static bending radius: 4x AD mm min.
- Shipping- and storage temperature range: -10 °C up to +75 °C
- Operating temperature range: -10 °C up to +60 °C
- Installation temperature range: 0 °C up to +50 °C
- DC loop resistance: ≤ 280 Ω km
- Resistance unbalance ≤ 2%
- Insulation resistance: ≥ 2000MΩ/km @500V
- Capacitance: nom. 48 nF/km @ 800 Hz
- Capacitance unbalance (pair-ground): ≤ 1500 nF/km
- Characeristic Impedance: 100 ± 15 Ohm @ 10-100 MHz
- NVP: 67%
- Propagation delay: nom. ≤ 555 ns/100 m
- Delay skew: nom. ≤ 50 ns/ 100 m
- Test voltage (DC 1 min) core/core: 1000V
- Coupling attenuation: ≥ 40 dB
- Capacitance: 48 pF/m nominal @ 800 Hz
- Capacitance unbalance (pair-ground): 1.5 pF/m max. @ 1 KHz
- Insulation resistance: 2 GOhm x km min.
- DC loop resistance: 147 Ohm/Km max. (2% max. resistance unbalance)
- Voltage resistance: 72 Vdc max.
- Coupling attenuation: 40 dB
- Signal propagation delay: 450 nS/100 m max.
- Propagation delay: 20 nS/100 m max.
See product description
Similar Products
-
33FT Tripp Lite Duplex Multimode 50/125 LC Male To LC Male Fiber Patch Cable - Orange
IN STOCK
€ 23.18 (incl. VAT) -
3FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Unshielded Patch Cable - Red
IN STOCK
€ 5.01 (incl. VAT) -
C2G Cat5E 350MHz Snagless Unshielded (UTP) Patch Cable 0.3 Meter Networking Cable Blue
IN STOCK
€ 3.05 (incl. VAT) -
Tripp Lite 10FT Duplex Multimode SC to SC 62.5/125 Fiber Patch Cable - Orange
IN STOCK
€ 19.30 (incl. VAT) -
C2G Cat6 Snagless Unshielded 150ft Networking Patch Cable - Blue
IN STOCK
€ 85.11 (incl. VAT) -
10FT Belkin RJ45 Male To RJ45 Male CAT6 Molded Snagless Ethernet Patch Cable - Black
IN STOCK
€ 7.03 (incl. VAT) -
C2G Unshielded Non-booted Cat6 Ethernet Network Cable - Gray - 15ft
IN STOCK
€ 9.41 (incl. VAT) -
Tripp Lite 3FT RJ45 Male Cat6 Gigabit 550Mhz Snagless Molded Patch Cable - Green
IN STOCK
€ 3.97 (incl. VAT) -
1000FT C2G Cat5e Bulk Unshielded Network Cable with Stranded Conductors - Blue
IN STOCK
€ 287.63 (incl. VAT) -
Tripp Lite 3FT ST to ST Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
€ 18.40 (incl. VAT) -
C2G Solid Shielded Snagless Cat6 Ethernet Network Patch Cable - Blue - 200ft
IN STOCK
€ 218.78 (incl. VAT) -
6FT Belkin RJ-45 Male To RJ-45 Male Cat5e Networking Patch Cable - Yellow
IN STOCK
€ 8.57 (incl. VAT) -
4FT C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Unshielded Ethernet Patch Cable - Blue
IN STOCK
€ 4.14 (incl. VAT) -
C2G Unshielded Snagless Cat6 Ethernet Network Patch Cable - Red - 0.5ft
IN STOCK
€ 4.42 (incl. VAT) -
Tripp Lite Cat6 Gigabit 1.83M RJ45 Male Snagless Molded Patch Cable - Black
IN STOCK
€ 3.99 (incl. VAT)
Details
Future-oriented standards and high-end quality for your network.
- Suitable for direct assembly of RJ45 connectors in order to produce patch cords
- Suitable for installations of class D cable lines, 100 MHz
- According to the norms ANSI/TIA 568-C; ISO/IEC 11801 2nd Ed.; EN 50173; EN 50288-3-1
- Conductor: Copper (Cu)
- PoE ready
The raw patch cords are manufactured and tested acc. to the ISO/IEC 11801 and DIN EN 50173 specifications. They will guarantee that the installed cabling system is compliant with the ISO & EN channel specification requirements and therefore provide optimum performance levels for your cablings.The raw patch cords are suitable for the direct assembly of RJ45 connector in order to produce patch cords.
- Suitable for direct assembly of RJ45 connectors in order to produce patch cords
- Suitable for installations of class D cable lines, 100 MHz
- According to the norms ANSI/TIA 568-C; ISO/IEC 11801 2nd Ed.; EN 50173; EN 50288-3-1
- Conductor: Copper (Cu)
- PoE ready
The raw patch cords are manufactured and tested acc. to the ISO/IEC 11801 and DIN EN 50173 specifications. They will guarantee that the installed cabling system is compliant with the ISO & EN channel specification requirements and therefore provide optimum performance levels for your cablings.The raw patch cords are suitable for the direct assembly of RJ45 connector in order to produce patch cords.
Specifications
| TYPE | Cat5e |
| LENGTH | 305 m |
| LEFT CONNECTOR | No |
| RIGHT CONNECTOR | No |
| CABLE SHIELDING | SF/UTP (S-FTP) |
| MATERIAL | Polyvinyl chloride (PVC) |