- Range Extender mode boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly
- Miniature size and wall-mounted design make it easy to deploy and move flexibly
- Easily expand wireless coverage at a push of Range Extender button
Expected to ship tomorrow
-or spend €100.00 to get free shipping
- Extend USB 3.2 Gen 1 signals from 2 hosts up to 100m using Cat.6A network cable (not included)
- Power over Cable requires a single power supply to be connected to the transmitter or receiver only
- Supports USB 3.2 Gen 1 (USB 3.0) up to 5Gbps, USB 2.0/1.1 backwards compatibility, RS232, APIs and FSYNC pass-through ports
Expected to ship within 10 days of order
- WIDE STANDARD COMPATIBILITY: High speed Industrial Gigabit PoE Injector compatible with IEEE 802.3bt (PoE++) and previous 90W proprietary POE standards including Cisco uPoE, Bosch & AXIS
- 90W POWER BUDGET: Provides up to 90W of auto-negotiated power output for Type 3 and Type 4 PoE/Ultra/UPoE applications like tilt and pan cameras and high power IEEE 802.11ax wireless access points
- TECH SPECS: 1 Gbps; 52V-56VDC Power Input; IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt 90W max, uPoE, 10/100/1000 Mbps Auto Negotiation, DIN/Wall Mountable, Redundant Power Input
Expected to ship within 15 days of order
- Extends a single USB Type C port up to 100m using Cat.5e/6 network cable (not included)
- Plug and Play installation, OS independent
- Perfect for use with USB 2.0 devices such as storage devices, printers, scanners, mice and keyboards*
Expected to ship within 10 days of order
- Lindy 43363, Network transmitter & receiver, 300 m, 5000 Mbit/s, Fiber, Micro-USB 3.2 Gen 1 (3.1 Gen 1) Type-B, Black
Expected to ship within 10 days of order
- 100M EXTENSION: Extend a PSE source (up to 95W) by 100m using this Gigabit PoE Extender; power PoE devices like cameras & access points; 4 extenders can be cascaded to extend up to 400m using CAT 5e/6
- 60W PoE IEEE 802.3bt: Powered by the PSE source, this Power over Ethernet range extender provides up to 15W/30W/60W of auto-negotiated power output to target PD device
- Low 2.7W power consumption
Expected to ship within 15 days of order
- Network repeater 100 m 2000 Mbit/s
- 10/100/1000Base-T(X)
- Power over Ethernet (PoE)
Expected to ship within 15 days of order
- Doubles the maximum connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
- Connects and powers two PoE devices, such as network cameras, wireless access points or VoIP phones, from a PSE port on a PoE injector or PoE switch
- Delivers up to 60 W to two connected PoE devices with per-port power up to 30 W
Expected to ship within 15 days of order
- Extend 2 USB 2.0 ports up to 50m using low cost Cat.6 network cable (not included)
- Bi-directional PoC (Power over Cable) requires a power supply connection from only one side of the installation
- Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed
Expected to ship within 10 days of order
- 5 GHz backup radio
- Operational range of up to 500 meters
- 6 Gbps throughput rate
Expected to ship within 8 days of order
- 5 GHz backup radio
- Supported stations and distances:
- – Wave Long-Range: up to 8 km
Expected to ship within 8 days of order
- Extends USB 2.0 connections up to 200m
- Supports transfer rates up to 480Mbps
- Low RFI/EMI for sensitive environments
Expected to ship within 10 days of order
- Extends USB 3.2 Gen 2 connections up to 100m
- Supports data transfer rates up to 10Gbps
- Uses standard “off the shelf” LC duplex fibre cabling
Expected to ship within 10 days of order
Expected to ship within 8 days of order
- Network transmitter 100 m 2000 Mbit/s
- 10/100/1000Base-T(X)
- Power over Ethernet (PoE)
Expected to ship within 15 days of order