Noctua NA-FK1 computer cooling system Processor Fan 12 cm by Noctua
- Be the first to review
- Item Number: FD2805406
- Part Number: NA-FK1
.png){kind=logo}
Key Features
- Noctua NA-FK1, Fan, 12 cm, 450 RPM, 1700 RPM
See product description
Similar Products
-
Phanteks 120MM 2000RPM Reversed Blade Computer Case Fan - White
IN STOCK
$ 22.47 -
Noiseblocker NB-eLoop B14-1 600RPM 140mm Case Fan
IN STOCK
$ 41.06 -
Noiseblocker NB-eLoop B12-2 1300RPM 120mm Case Fan
IN STOCK
$ 33.16 -
Noctua 120mm 1200RPM Case Fan
IN STOCK
$ 28.90 -
Noctua Chromax Black Swap 120mm 1200RPM Computer Case Fan w/Anti-Vibration Pads
IN STOCK
$ 71.46 -
Noctua NF-A12X25 Chromax 120MM Computer Case Fan - Black
IN STOCK
$ 68.67 -
Noiseblocker NB-eLoop B12-4 120mm 2400RPM Case Fan
IN STOCK
$ 32.06 -
Noctua NF-A12x25 120mm 2000RPM 5V Case Fan - Beige, Brown
IN STOCK
$ 52.32 -
Phanteks D30 PWM D-RGB 120mm Computer Case Fan - 3 pack
IN STOCK
$ 128.05 -
StarTech 50mm 4500RPM TX3/LP4 Ball Bearing Case Fan
IN STOCK
$ 15.85 -
Supermicro 40MM 13000RPM 4-Pin Fan - Black
IN STOCK
$ 31.54 -
Noctua 40x20mm 5000RPM 5V PWM Computer Case Fan
IN STOCK
$ 31.36 -
StarTech Expansion Slot Rear Exhaust Cooling Fan with LP4 Connector
IN STOCK
$ 19.11 -
Noctua 140mm 1200RPM PWM Computer Case Fan
IN STOCK
$ 35.34 -
Seasonic MagFlow 1200mm 1225PWM ARGB 1-Fan Package
IN STOCK
$ 50.36
Details
The NA-FK1 is a second fan kit for the NH-U12S redux CPU cooler. Upgrading it to a push/pull-style dual-fan setup makes it possible to further improve cooling performance or to reduce noise levels by having two fans running at lower speeds. The kit includes a second NF-P12 redux-1700 PWM fan, anti-vibration pads, fan mounting clips, a 4-pin PWM y-cable as well as two Low-Noise Adaptors – everything you need to boost the efficiency of your NH-U12S redux!
Enhanced cooling performance
Adding a second NF-P12 redux-1700 PWM fan to the NH-U12S redux makes it possible to further improve cooling performance by around 1-3°C, depending on the application. As a rule of thumb, the gains are bigger the higher the heat load, so the NA-FK1 is particularly attractive for higher-end CPUs, extensive turbo use or overclocking.
Lower noise levels and acoustic fine-tuning
The NA-FK1 can not only be used to enhance cooling performance, but also to lower noise levels: by letting both fans run at reduced speeds, either via automatic PWM control using the supplied y-cable or via the included Low-Noise Adaptors, the NH-U12S redux can operate more quietly while maintaining the same level of performance.
NF-P12 redux-1700 PWM
The NF-P12 redux-1700 PWM fan included with the NA-FK1 is the same high-quality unit that comes pre-installed on the NH-U12S redux CPU cooler, so it’s a perfect match for a push/pull-style dual-fan setup. Supporting PWM for automatic speed control, it can run near silent most of the time and provide massive performance when necessary.
Enhanced cooling performance
Adding a second NF-P12 redux-1700 PWM fan to the NH-U12S redux makes it possible to further improve cooling performance by around 1-3°C, depending on the application. As a rule of thumb, the gains are bigger the higher the heat load, so the NA-FK1 is particularly attractive for higher-end CPUs, extensive turbo use or overclocking.
Lower noise levels and acoustic fine-tuning
The NA-FK1 can not only be used to enhance cooling performance, but also to lower noise levels: by letting both fans run at reduced speeds, either via automatic PWM control using the supplied y-cable or via the included Low-Noise Adaptors, the NH-U12S redux can operate more quietly while maintaining the same level of performance.
NF-P12 redux-1700 PWM
The NF-P12 redux-1700 PWM fan included with the NA-FK1 is the same high-quality unit that comes pre-installed on the NH-U12S redux CPU cooler, so it’s a perfect match for a push/pull-style dual-fan setup. Supporting PWM for automatic speed control, it can run near silent most of the time and provide massive performance when necessary.
Specifications
| FAN DIAMETER | 12 cm |
| ROTATION SPEED | 450 RPM |
| NOISE LEVEL | 25.1 dB |
| AIRFLOW | 120.2 cfm |
| CONNECTOR | 4-pin |
| VOLTAGE | 12 V |